Click on any image below for a bigger view into our operations.
Quality Electric is located in Princeton, WV.
We have over 28,000 square feet of operations with state-of-the-art equipment.
Our shop’s interior.
We take great pride in our pump repair and machine shop.
Our staff consists of 25 hardworking and experienced (many with 30+ years) employees on two separate shifts.
With our 400 HP A&W Dynamometer Load Test Center, we check motors for performance after rebuild.
With the Phenix Core Loss Tester, we check stator cores before winding for bad iron cores and hot spots.
To check for broken or cracked roter bars, we use the 4602 Bench Growler.
Joe working on a DC motor.
Steve gives a joy cutter motor final inspection before assembly.
Brandon tests a stator rewind using our baker 6E surge tester before assembly.
Brandon winds an AC stator.
Jimmy winds an armature.
Closeup of an armature.
David with our 46″ lathe.
David with another engine lathe used to machine to precision fits.
Our boring mill.
Our 300-ton press.
We sand blast parts with Econoline sandblasters.
Using our Epoxylite VPI system, we are getting ready to VPI a 235 HP Ripper.
Willie working a 23 HP FLYGT pump.
Fred assembling an AC motor.
David working on DC assembly.
Joey working on an AC tear-down.
Our Dynabal balance machine.
Our 6x6x6 Stealman bake oven.
Our Ace burnoff oven.
AC stators ready for assembly.
Some of our pumps.
Some of our motor inventory, ready to be shipped.